Fuel Injector Clinic LS3/LS7/LSA/L99 Injector Set 8x2150cc/min (IS303-2150H)
FIC-IS303-2150H
Regular price $1,623.00LS3, LS7, L76, L92, L99 Fuel Injector Clinic Injector Set: 8 x 2150cc Saturated / High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology . These injectors do not require a resistor pack or P&H drivers. Includes pigtails PGT DEN8 or add Plug & Play adaptors PADPDtoU8. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS
Plug and Play GM ECU Data Available at http://fuelinjectorclinic.com/GMData
This massive injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU's ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.
CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.
This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle's OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications.
Shipping Policy
JDP Motorsports offers Ground, 3 Day, 2nd Day, and Next Day shipping. Expedited shipping is available. Next Day Air shipping does not guarantee that your product will be delivered the following day, but rather, that your product will be delivered 1 business day after your order has been fulfilled. All shipments come with a tracking number when processing and shipping is final.
Please allow 1-2 business days for orders to be processed. For all items that are not currently in stock, JDP Motorsports will contact you via email to notify you of the estimated shipping date. Some items ship direct from the manufacturer.
JDP Motorsports will send you the tracking information for your order as soon as it becomes available. If you decide to cancel your order after your order has shipped you will be responsible for all shipping charges including any shipping paid by JDP Motorsports as well as return shipping and additional fees depending on the circumstance. JDP Motorsports reserves the right to apply a restocking fee up to 20%.
International Shipping
All orders shipped to international locations including Canada are final and non-refundable. JDP Motorsports may require additional information before your order is processed. International shipping rates will be applied according to the destination and dimensions of the item and will require a signature at the time of delivery. You will be responsible for any additional fees, duties, and taxes. For any orders returned to JDP Motorsports due to non-payment of custom fees or because the item was not claimed a credit will be given minus any shipping/handling costs along with a restocking fee up to 20%.
Return Policy
Returns: New, unused items in their original packaging and in resale condition may be returned within 30 days of the date in which the product was shipped. Please contact JDP for a RMA number before returning any product. All shipping charges including those originally paid by JDP are non-refundable and any return shipping costs are your responsibility. A restocking fee up to 20% may be applied. Any specialized or custom orders are final and non-refundable. Installed items or modified parts may not be returned.
Return Shipping Charges: JDP requires you to use a trackable shipping method when returning product. We will not be responsible for packages that are lost or damaged during transit. We suggest you insure the package when returning the product. JDP is not responsible for any shipping costs on returned items.
Damage Claims: Damage claims should be made with JDP within 24 hours after the product is received. Please make a claim with the shipper if the damage is noticed at the time of delivery. JDP may refuse a return if an issue regarding damaged product is not reported during the stated time frame.
Manufacturer Warranty: Any and all warranties are provided solely by the manufacturer. These warranties can vary depending on the manufacturer and may cover issues after JDP’s return policy expires. Any warranty claim is determined by the manufacturer and JDP does not have control over the outcome regarding the manufacturer’s decision on a warranty issue.
Return Packaging: Returned items must be packaged securely in the original packaging/outer shipping carton. Please do not write on the product packaging and only write on the outer carton. Please write your Authorization Number in clear print on the outer carton. JDP reserves the right to refuse any packages received without a RA number. Returned product must be in new, re-sale condition with all original boxes, including packages, parts, manual, etc. All returns will be inspected at the time the product is received and the refund will be determined. It may take up to 30 days for a credit to be issued.
Restocking Fee: All returns are subject to a restocking fee up to 20% and will be assessed by JDP according to the circumstance of the return.